 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-4120-430-14
0051 00
FILTER-DRIER LOCATION
The filter-drier is located on the top center wall of the housing. See figure 1.
REMOVAL
WARNING
Ensure power source is disconnected.
Ensure the refrigerant system is discharged.
1.
Debraze refrigerant lines (1 and 2) from filter-drier (3) (WP 0046 00).
2.
Remove screw (4), lock nut (5), and strap (6).
3.
Remove filter-drier (3).
Figure 1. Filter-Dryer
INSTALLATION
CAUTION
Replacement filter-drier are packaged with sealing caps on the flare fittings to prevent
moisture contamination of the desiccant filtering media. Remove these caps immediately
prior to installation. Never install a filter-drier from which caps have been removed for an
extended or unknown period of time.
1.
Check the direction arrow marked on the filter-drier (3).
2.
Position filter-drier (3) between refrigerant lines (1 and 2).
0051 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals