TM 10-8145-222-23
0011
PMCS CONTINUED
Table 1. Maintainer Maintenance Preventative Maintenance Checks and Services (PMCS) Continued.
Item
Interval
Item To Be
Procedure
Equipment
No.
Checked or
Not Ready/
Serviced
Available If
6
1500
Control Box
a. Disconnect battery (WP 0053, Disconnect).
Hours
Control Panel
b. Open and secure control box door (30).
c.
Remove two screws (31) and two nuts (32) securing
control panel (33).
d. Carefully pull control panel (33) and two standoffs (34)
out and away from control panel assembly to access
wiring for inspection.
e. Check electrical connections for looseness and tighten
Electrical
as needed.
connections
loose.
f.
Check electrical connections for discoloration indicating
Discoloration or
possible hidden corrosion. If found, tag and disconnect
corrosion
wiring; clean and reconnect as tagged.
found.
g. Check electrical connections and wiring for signs of
Signs of
overheating or arcing. Repair wiring as needed.
overheating or
arcing found.
h. Reinstall two standoffs (34) and control panel (33) and
Control panel
secure using two screws (31) and two nuts (32).
not installed.
i.
Close and secure control box door (30).
Control box
door not
closed.
0011-15
