TM 10-8145-222-23
MAINTAINER MAINTENANCE
MICROPROCESSOR CONTROL BOX
(MTRCS01 ONLY)
REPAIR
INITIAL SETUP:
Tools and Special Tools
References
TM 10-8415-222-10
Service Refrigeration Ordnance
Tool Kit (WP 0096, Table 2, Item 6)
TM 10-8415-222-10
TM 10-8145-222-23P
Personnel Required
Equipment Condition
Utilities Equipment Repairer
Refrigeration unit shut down (TM 10-8415-222-10)
External power cables disconnected (TM 10-8415-
222-10)
REPAIR
WARNING
Capacitors can store electrical power for extended periods of time after being
disconnected from power supply. A bleed resistor is connected across the capacitor
terminal to discharge this power more quickly. Do not touch capacitor terminals for
the first five minutes after the power has been disconnected.
1. Disconnect battery negative (-) terminal (WP 0053, Disconnect).
2. Loosen two screws (Figure 1, Item 1) on Microprocessor Control (MPC) box cover (Figure 1, Item 2).
3. Open cover (Figure 1, Item 2).
4. Proceed to appropriate procedure below.
0078-1
