TM 10-8145-222-23
0081
REPLACE CONTINUED
Figure 1. Control Panel.
7. Remove two bolts (Figure 2, Item 2) and washers (Figure 2, Item 3) securing evaporator cover (Figure 2,
Item 1) closed.
8. Tag and disconnect two solenoid (Figure 2, Item 4) electrical connectors and move out of way.
9. Remove insulation (Figure 2, Item 15) from TXV bulb (Figure 2, Item 5).
10. Cut wires ties as needed securing TXV bulb capillary line (Figure 2, Item 6) to refrigerant piping.
11. Remove two screws (Figure 2, Item 16) and lock nuts (Figure 2, Item 17) securing solenoid bracket (Figure 2,
Item 18) to evaporator.
12. Remove bracket (Figure 2, Item 18) with solenoids (Figure 2, Item 4) attached and position away from TXV
(Figure 2, Item 12).
13. Remove one nut (Figure 2, Item 19), washer (Figure 2, Item 20), and clamp (Figure 2, Item 21) securing TXV to
pipe (Figure 2, Item 22).