TM 10-8145-222-23
0083
REPAIR CONTINUED
Figure 9. Control Panel Assembly Bolts.
WARNING
Removal of the power box/transformer is performed using a forklift. The forklift
operator must be aware of ground personnel at all times. Forklift can cause damage
to the equipment.
Always use hearing and head protection when working with or around a forklift. A
forklift engine puts out high noise that can cause serious hearing damage. Many
head injury hazard possibilities exist while using a forklift, such as falling loads and
collision with the forklift itself. Head related injuries can cause serious additional
health hazards or even death to personnel.
CAUTION
When positioning the fork lift tines to support the power box, make sure that you do
not trap any wires between the forklift tines and the bottom of the power box.
11. Carefully position forklift tines on each side of center cable entering power box and raise tines slightly to support
weight of power box during removal (Figure 10).