Section III MAINTENANCE PROCEDURES

TM5-4120-383-14

Section III

MAINTENANCE PROCEDURES

5-3.

GENERAL.

The procedures in this section have been arranged in the order in

which the items appear in the direct (F) maintenance level column

on the Maintenance Allocation Chart (MAC) which is provided in

Step-by-step procedures have been provided for all

action authorized to be performed by direct maintenance in the

order in which they appear on the MAC. Actions authorized to be

performed by organizational and general support maintenance have

been duly noted; step-by-step procedures for these actions may be

found in Chapters 4 and 6 respectively.

FABRIC COVER.

5-4.

For removal, inspection, lubrication, cleaning and installation see

a. Repair. Minor rips, cuts, tears, or punctures may be

repaired by applying a patch to the inside surface.

b. Replace.

For damage of greater extent, or missing eyelets

or snap fasteners replace the entire cover.

TOP COVERS.

For removal, cleaning, inspection and installation see paragraph

4-11.

a. Repair.

The only authorized repairs for these panels are

replacement of gaskets, insulation and information plates.

(1) Use only gaskets, insulation, or name plates identified

in TM5-4120-383-24P.

NOTE

An initial supply of adhesive is supplied as Item 2,

Section II, Expendable Supplies and Materials List.

(2) Remove as much old gasket or insulation material as

possible by pulling or scraping it away from the metal surface.