EVAPORATOR COIL.-Continued - TM-5-4120-384-140244

TM5-4120-384-14

5-20.

EVAPORATOR

COIL.-Continued

(2) Secure mist eliminator holder and evaporator coil to

housing with four pan head screws, lock washers, and flat washers.

Secure evaporator coil to housing with two each screws, lock

washers, and flat washers.

The four holes in the mist eliminator

holder match the bottom four holes in the coil.

(3) Align tubing connections to tee and expansion valve.

Braze joints in accordance with paraqraph 5-13.

Take care that

expansion valve is protected during brazing operation.

(4)

Replace

(See

Leak test coil, dehydrator, newly brazed joints, and

(5)

j o i n t s i n the area of newly brazed joints per paragraph 5-14.

(6)

Rewrap

insulation

that

was

removed

prior

debrazing.

TOP mark must be

Slide mist eliminator into its holder.

(7)

and air flow arrows must point away from coil.

(8) (Models F18H-3S and F18H-1S) Install supply air louver

and top front cover (para 4-14 and 4-11).

(Models F18H-3SA and

F18H-3SB) Install supply air louver and top cover (para 4-14 and

4-11).

(9) Evacuate and charge refrigeration

system

accordance

with

5-45

Change 2