 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9 4120-423-14&P
CHASSIS AND SNAP FASTENER
THIS WORK PACKAGE COVERS:
Inspection of Installed Items
Repair or Replacement
Tools and Special Tools
Drill
Knife
Materials/Parts
Chassis
SP3919
Dry Cleaning Solvent P-D-680 Type III
Adhesive, Sealant
MIL-A-46106 Type I
Personnel Required
Unit Technician
Equipment Conditions
Condenser section electrical module
assembly removed. (See WP0051.)
Power disconnected.
INSPECTION OF INSTALLED ITEMS
1
Using screwdriver and wrench, remove eight screws, six nuts, and two lockwashers that hold
cover to chassis.
2
Pull cover away from chassis as far as wiring harness will allow.
3
Check for broken welds, cracks, dents, and general condition. Replace if damaged.
4
Check that danger plate is in place and legible. Replace if missing, damaged, or illegible.
5
Check that EMI gaskets are not cracked, loose, or missing. Repair if loose, replace if cracked or
missing.
0056 00-1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals