Table 1. Unit Preventive Maintenance Checks and Services (PMCS) - continued

TM 9-4120-430-14

0015 00

Table 1. Unit Preventive Maintenance Checks and Services (PMCS) - Continued

ITEM TO BE

EQUIPMENT NOT

ITEM

INTERVAL

CHECKED OR

PROCEDURE

READY/AVAILABLE

NO.

SERVICED

IF:

4. Inspect louver (3) for bent blades.

Straighten or replace.

5. Lubricate air filter (5) with filter-kote

(Item 17, WP 0069 00). Drain off

excessive oil.

6. Slide air filter (5) and filter media (6)

into attached clips of louver housing

(3).

7. Install evaporator air intake louver (3)

with screws (1) and washers (2).

Weekly

Evaporator Air

1. See figure 2. Check louver (1) for dirt

Louver is missing or

Discharge Louver

or damage.

needs to be replaced.

2. Clean or replace damaged parts.

3. Inspect louver for bent blades.

Straighten or replace.

Figure 2. Evaporator Air Discharge Louver

Quarterly

Mist Eliminator

1. See figure 3. Remove top cover (1).

Items are damaged,

missing or clogged.

2. Slide mist eliminator (2) and filter

media (3) out of the mist eliminator

holder brackets (4 and 5).

3. Inspect mist eliminator (2) and filter

0015 00-3