TM 10-8145-222-23
0034
REPLACE CONTINUED
NOTE
The alternator will be partially removed to gain access for the condenser fan
replacement. When partially removing alternator, only the attaching hardware needs
to be removed. The wiring can be left attached.
6. Loosen alternator mounting bolts (Figure 3, Item 1 and Item 2) and self-locking nut (Figure 3, Item 3) enough
that the alternator (Figure 3, Item 4) is free to pivot. Do not remove at this time.
7. Screw alternator adjusting bolt (Figure 3, Item 5) counterclockwise until tension is off V-Belt (Figure 3, Item 6).
8. Push alternator (Figure 3, Item 4) downward to loosen alternator V-belt (Figure 3, Item 6).
0034-5