TM 10-8145-222-23
0055
REPLACE CONTINUED
Figure 3. Evaporator Sensors.
13. Carefully remove sealant as needed from container pass through forward wall (Figure 3, Item 9) on inside and
outside of container so that cable will be able to be pulled through.
14. Remove snap pin (Figure 4, Item 1) from holder securing hinged mount bracket (Figure 4, Item 2) to frame.
15. Swing hinged mount bracket (Figure 4, Item 2) open with chart recorder (Figure 4, Item 3) attached.
16. While maintaining firm grasp of chart recorder, remove two bolts (Figure 4, Item 4) and lock washers (Figure 4,
Item 5) securing chart recorder (Figure 4, Item 3) to mount bracket (Figure 4, Item 6). Discard lock washers.
