TM 10-8145-222-23
0057
REPAIR CONTINUED
WARNING
MIL-P-53022B Type 1 epoxy primer is combustible. Keep away from excessive heat,
sparks, electrical equipment, and open flames.
MIL-P-53022B Type 1 epoxy primer may be irritating to eyes and skin if contact is
made. Wear protective clothing, gloves, and face shield. Wash areas of skin
thoroughly with soap and water. Flush eyes with lukewarm low pressure water for 15-
minutes and seek medical attention.
Vapors from MIL-P-53022B Type 1 epoxy primer may be irritating to eyes, nose, and
throat. Avoid prolonged exposure and use only in a well ventilated area.
NOTE
MIL-P-53022B Type 1 epoxy primer is a two-part component that must be mixed prior
to use.
MIL-P-53022B Type 1 epoxy primer is tack free within 5 minutes and is dry hard
within 90-minutes.
8. Mix epoxy primer at a ratio of four parts epoxy primer to one part catalyst by volume.
9. Apply epoxy primer to affected area using a light brush coat.
10. Allow area to dry for a minimum of 30 minutes before applying next coat.
WARNING
MIL-C-85285C Type 1 topcoat is combustible. Keep away from excessive heat,
sparks, electrical equipment, and open flames.
MIL-C-85285C Type 1 topcoat may be irritating to eyes and skin if contact is made.
Wear protective clothing, gloves, and face shield. Wash areas of skin thoroughly with
soap and water. Flush eyes with lukewarm low pressure water for 15 minutes and
seek medical attention.
Vapors from MIL-C-85285C Type 1 topcoat may be irritating to eyes, nose, and
throat. Avoid prolonged exposure and use only in a well ventilated area.
NOTE
MIL-C-85285C Type 1 topcoat is a two-part component that must be mixed prior to
use.
11. Mix topcoat at a ratio of four parts pigmented component to one part catalyst by volume.REPAIR
CONTINUED
12. Let material stand for 15 minutes before applying to allow for chemical induction.
13. Brush topcoat on to affected area needing touch up.
END OF TASK
END OF WORK PACKAGE
0057-10
