TM 10-8145-222-23
0068
REPLACE CONTINUED
18. Remove one screw (Figure 6, Item 1), nut (Figure 6, Item 2), lock washer (Figure 6, Item 3), and washer
(Figure 6, Item 4) securing two clamps (Figure 6, Item 5) to two refrigerant pipes (Figure 6, Item 6 and Item 7)
near filter-drier (Figure 6, Item 8) inlet. Remove and retain clamps.
19. Remove one screw (Figure 6, Item 9), nut (Figure 6, Item 10), lock washer (Figure 6, Item 11), and washer
(Figure 6, Item 12) securing two clamps (Figure 6, Item 13) to two refrigerant pipes (Figure 6, Item 7 and
Item 14) near filter-drier (Figure 6, Item 8) inlet. Remove and retain clamps.
20. Loosen fitting (Figure 6, Item 15) and disconnect refrigeration pipe (Figure 6, Item 6) from filter-dryer (Figure 6,
Item 8) inlet.
0068-7
