TM 10-8145-222-23
0068
REPLACE CONTINUED
13. Remove fan shroud (Figure 4, Item 6).
14. Remove one hex head bolt (Figure 4, Item 7) securing one end of black support bar (Figure 4, Item 8) to
condenser (Figure 4, Item 3).
15. Disconnect refrigerant piping (Figure 5, Item 1) from receiver outlet valve (Figure 5, Item 2).
16. Disconnect condenser piping (Figure 5, Item 3) from receiver 3/8-inch check valve (Figure 5, Item 4).
17. Disconnect hot gas line (Figure 5, Item 5) from receiver 1/4-inch check valve (Figure 5, Item 6).
Figure 5. Receiver Lines Disconnect.