TM 10-8145-222-23
0068
REPLACE CONTINUED
WARNING
Soldering procedures emit gasses that can be harmful if inhaled for long durations.
Before performing any soldering procedures, make sure that adequate ventilation is
available. Use face shield and protective gloves when performing soldering
procedures.
CAUTION
Soldering and desoldering procedures take place in a very tight surrounding. Make
sure a heat shield is used during solder and desolder procedures to protect wiring
and associated components nearby.
25. Desolder vertical refrigerant pipe running between radiator (Figure 8, Item 1) and accumulator (Figure 8, Item 2)
at soldered joint (Figure 8, Item 3).
Figure 8. Desolder Refrigerant Pipe.