TM 10-8145-222-23
0068
REPLACE CONTINUED
11. Install two clamps (Figure 6, Item 5) to two refrigerant pipes (Figure 6, Item 6 and Item 7) near filter-drier
(Figure 6, Item 8) inlet and secure using one screw (Figure 6, Item 1), nut (Figure 6, Item 2), lock washer
(Figure 6, Item 3), and washer (Figure 6, Item 4).
12. Connect hot gas line (Figure 5, Item 5) to receiver 1/4-inch check valve (Figure 5, Item 6).
13. Connect condenser piping (Figure 5, Item 3) to receiver 3/8-inch check valve (Figure 5, Item 4).
14. Connect refrigerant piping (Figure 5, Item 1) to receiver outlet valve (Figure 5, Item 2).
15. Connect black bar (Figure 4, Item 8) to condenser (Figure 4, Item 3) using one hex head bolt (Figure 4, Item 7).
16. Install fan shroud (Figure 4, Item 6) and secure to condenser (Figure 4, Item 3) using two screws (Figure 4,
Item 4) and washers (Figure 4, Item 5).
17. Remove four hex head screws (Figure 4, Item 1) securing two channel bars (Figure 4, Item 2) to condenser
(Figure 4, Item 3).
18. Install channel bar (Figure 3, Item 5) and overflow tank (Figure 3, Item 3) to frame (Figure 3, Item 6) and
radiator (Figure 3, Item 2) and secure using four hex head screws (Figure 3, Item 4).
19. Install and reconnect radiator overflow tube (Figure 3, Item 1) to radiator (Figure 3, Item 2) and overflow tank
(Figure 3, Item 3).
20. Reconnect upper radiator hose (Figure 2, Item 2) to radiator (Figure 2, Item 3) and secure using one clamp
(Figure 2, Item 1).
21. Reconnect lower radiator hose (Figure 1, Item 2) to radiator (Figure 1, Item 3) and secure using one clamp
(Figure 1, Item 1).
22. Install small clear tube (Figure 1, Item 4) and secure to lower radiator hose (Figure 1, Item 2) by wrapping it
around hose.
23. Confirm condenser fan clearance of 1 1/4-inch (+/- 1/4-inch) from fan blade to new radiator fins.
24. Install RU (WP 0059, MTRCS01, WP 0059.1, MTRCS02).
25. Refill radiator with engine coolant (WP 0026, Refill Cooling System).
26. Replace filter-drier (WP 0018, Replace).
27. Perform evacuation and dehydration (WP 0014, Service).
28. Perform refrigerant leak check and repair leaks as required (WP 0014, Service).
29. Charge system with refrigerant (WP 0014, Service).
0068-14