TM 10-8145-222-23
0084
REPAIR CONTINUED
7. Secure transformer (Figure 16, Item 2) to power box (Figure 17, Item 4) using four bolts (Figure 17, Item 1), lock
washers (Figure 17, Item 2), and washers (Figure 17, Item 3).
8. Remove lifting strap (Figure 16, Item 1).
9. Reconnect two TR1-X0 wires to terminal X0 on transformer (Figure 15).
10. Plug in K1 relay per this WP.
WARNING
Installation of the power box/transformer is performed using a forklift. The forklift
operator must be aware of ground personnel at all times. Forklift can cause damage
to equipment.
Always use hearing and head protection when working with or around a forklift. A
forklift engine puts out high noise that can cause serious hearing damage. Many
head injury hazard possibilities exist while using a forklift, such as falling loads and
collision with the forklift itself. Head related injuries can cause serious additional
health hazards or even death to personnel.
CAUTION
When positioning the power box onto the fork lift tines to support, make sure that you
do not trap any wires between the forklift tines and the bottom of the power box.
11. Use three persons to lift power box (Figure 13, Item 1) onto forklift with bottom of power box resting on forklift
tines (Figure 21).
12. Slowly move forklift, with power box, towards MTRCS.
0084-23
