 |
|||
|
|
|||
|
Page Title:
REMOVE/INSTALL WIRE PROCEDURES INDEX |
|
||
| ||||||||||
|
|
 TM 5-4110-240-13&P
REMOVE/INSTALL WIRE PROCEDURES INDEX
PROCEDURE
PAGE
Remove/Install Pilot Light Socket
Remove/Test/Install Power Receptacle
Remove/Test/Install Vapor Proof Light and Globe
Remove/Install Switch
Test Wires
REPAIR WIRES
TOOLS: Pocket Knife
1. Remove pilot light socket (1). Tag wires.
2. Remove power receptacle (2). Tag wires.
3. Remove vapor proof light (3). Tag wires.
4. Remove toggle switch (4). Tag wires.
5. If damaged portion of the wire is
accessible, cut back wire to an
undamaged point on either side of the
break and splice the wire together. If
necessary, splice a short piece of wire into
the gap created by removing the damaged
portion.
6. The wire is three-lead, color coded SJ cord
with a rubber insulating cover. If just one
wire is damaged, but the damaged area is
not accessible, repair by replacing only the
damaged wire. It will be necessary to
thread the new wire through the insulating
cover.
7. Test wires.
8. Install vapor proof light (3).
9. Install pilot light socket (1).
10. Install power receptacle (2).
11. Install switch (4).
Change 2 4-21
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals