CONDENSER FAN SUPPORT DIRECT SUPPORT MAINTENANCE REPLACEMENT

TM 9-4120-425-14&P

CONDENSER FAN SUPPORT DIRECT SUPPORT MAINTENANCE REPLACEMENT

THIS WORK PACKAGE COVERS:

Removal and Installation

INITIAL SETUP:

Maintenance Level

Direct Support

Tools and Special Tools

Tool Kit, General Mechanics (Item 1, Table 2, WP 0118-00)

Lifting device

Reference

WP 0063-00 Condenser fan scrolls

Equipment Condition

Main power source is disconnected, shut down and cool.

Top panel removed (WP 0019-00).

Liquid sight indicator mounting hardware removed (WP 0075-00).

Louver actuator cables removed (WP 0032-00).

Condenser fan motors removed (WP 0062-00).

Condenser air discharge louvers removed (WP 0021-00).

Condenser scrolls removed (WP 0063-00).

WARNING

Disconnect air conditioner power input connector.

NOTE

For removal and installation, a lifting device must be used to engage the four lifting

rings on the sides of the unit to access the condenser fan support screws.

WARNING

Do not allow the unit to swing while suspended from a lifting device. Failure to

observe this warning may result in injury to personnel and damage to the equipment.

CAUTION

Use care in handling to avoid damage to the air conditioner. If an overhead lifting

device must be used, use an appropriate sling so that the weight of the unit is

supported by the base of the shipping container.

0064-00-1