 |
|||
|
|
|||
|
Page Title:
Electronic Box Thermostat (Figure 5) |
|
||
| ||||||||||
|
|
 TM 9-4120-430-14
0028 00
Electronic Box Thermostat (Figure 5)
1.
With the lower housing plate removed, remove the electronic box thermostat (3) from side of unit housing by
removing two screws (1) and lock nuts (2).
2.
Remove defective electronic box thermostat (3) and wiring along with connector J3 and probe (4, Figure 1).
Figure 5. Electronic Box Thermostat
3.
Install replacement electronic box thermostat (3) and wiring along with connector J3 and probe.
4
Secure electronic box thermostat (3) to side of unit housing with two screws (1) and lock nuts (2).
5
Install replacement probe (4, Figure 1) to evaporator fan chassis (5) with clamp (3), flat washer (2), and screw (1).
6
Install wiring and connector J3.
7
Ensure all wire connections and grounds are correct and secure. See schematic diagram WP 0040 00. Remove tags.
8
Install lower housing plate (6, figure 2) to unit housing with four lockwashers (5) and screws (4).
Connectors J1, J2, and J3
1. Refer to WP 0029 00 for replacement procedures for connector J1.
2. Refer to WP 0027 00 for replacement procedures for connector J2.
0028 00-8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals