TM 10-8145-222-23
0071
REPLACE CONTINUED
23. Tag and disconnect inlet (Figure 7, Item 1) and outlet (Figure 7, Item 2) fuel lines from injector and engine
return, and allow residual fuel to drain into suitable container.
NOTE
Watch for residual oil in inlet and outlet lines. Use a spill kit placed under each hose
to catch any spillover.
24. Remove eight bolts (Figure 7, Item 3) and washers (Figure 7, Item 4) from two ends of cross member and top
plate (Figure 7, Item 5).
25. Tag and disconnect oil inlet (Figure 8, Item 1) and outlet (Figure 8, Item 2) lines from engine.
26. Remove cross member and top plate (Figure 7, Item 5).
Figure 8. Oil Lines.