TM 10-8145-222-23
0071
REPLACE CONTINUED
27. Disconnect engine ground strap (Figure 9, Item 1) from flywheel housing by removing one bolt (Figure 9,
Item 2) and lock washer (Figure 9, Item 3). Discard lock washer.
Figure 9. Engine Ground Strap.
NOTE
Ten bolts secure the two engine mount brackets to the refrigeration unit frame. The
five on the inboard side use identical hardware. Two of the outboard side bolts use
different lengths and additional hardware.
28. Remove eight bolts (Figure 10, Item 1), lock washers (Figure 10, Item 2), and washers (Figure 10, Item 3)
securing inboard engine mount bracket (Figure 10, Item 4) and outboard engine mount bracket (Figure 10,
Item 5) to refrigeration unit frame (Figure 10, Item 6). Discard lock washers.
29. Remove two longer bolts (Figure 10, Item 7 and Item 16), four washers (Figure 10, Item 9), two shock mounts
(Figure 10, Item 11), two spacers (Figure 10, Item 15), two lock washers (Figure 10, Item 8), and two nuts
(Figure 10, Item 10) from outboard engine mount bracket (Figure 10, Item 5) and refrigeration unit frame
(Figure 10, Item 6). Discard lock washers.
