• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
WIRING DIAGRAMS, ELECTRICAL SCHEMATICS, AND REFRIGERATION SCHEMATICS
PREPARATION FOR STORAGE ­ CONTINUED

TECHNICAL MANUAL FOR MULTI-TEMPERATURE REFRIGERATED CONTAINER SYSTEM
Page Navigation
  920    921    922    923    924  925  926    927    928    929    930  
img
. . . . . . . . . . .
TM 10-8145-222-23
0093
MAINTAINER MAINTENANCE
MULTI-TEMPERATURE REFRIGERATED CONTAINER SYSTEM (MTRCS)
PREPARATION FOR STORAGE OR SHIPMENT
INITIAL SETUP:
Tools and Special Tools
Personnel Required
Service Refrigeration Ordnance
Utilities Equipment Repairer (2), or Quarter-
Tool Kit (WP 0096, Table 2, Item 6)
master and Chemical Equipment Repairer (2)
SATS (WP 0096, Table 2, Item 8)
References
Equipment Condition
WP 0012
WP 0014
Refrigeration unit shut down (TM 10-8415-222-10)
WP 0024
WP 0052
TM 10-8415-222-10
TB MED 530
DA Pam 738-750
DA Pam 750-8
PREPARATION FOR STORAGE
NOTE
Pump down refrigeration unit to capture refrigerant if unit is to be stored for greater than 90 days.
1. If unit is to be stored for greater than 90 days, perform refrigeration unit pump down procedures (WP 0014,
pump refrigeration unit down).
2. Ensure MTRCS is tagged in accordance with unit SOP to indicate system is pumped down.
3. If using an external electrical source, make sure to disconnect power cable (WP 0052, Replace).
4. Perform PMCS to inspect equipment for damage incurred during use. If equipment is damaged, repair damage
in accordance with applicable repair procedure (TM 10-8415-222-10).
5. Inventory components against Components of End Item (COEI) and Basic Issue Items (BII) lists to verify unit is
complete. Report all discrepancies following the instructions of DA Pam 738-750 or DA Pam 750-8 as
applicable (TM 10-8415-222-10).
6. Check to see if equipment has been modified.
7. Empty fuel tank to appropriate level (WP 0012, Service).
8. Drain engine oil (WP 0024, Service).
9. Unload paper in temperature chart recorder (TM 10-8415-222-10).
10. Clean interior compartment in accordance with TB MED 530.
11. Secure PLS rollers in stowed position (TM 10-8415-222-10, Store).
12. Secure interior bulkhead in storage position (TM 10-8415-222-10, Store).
0093-1


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.