TM 10-8145-222-23
0013
REPLACE CONTINUED
NOTE
Three screws are installed on each side of the front panel assembly and secure the
front panel assembly and left and right panel front flanges to the frame.
4. Install six screws (Figure 2, Item 1), new lock washers (Figure 2, Item 2), and washers (Figure 2, Item 3) to
secure right side and left side of front panel assembly (Figure 2, Item 6) to frame.
Install Front Panel Cover Assembly
1. Place front panel cover assembly (Figure 2, Item 10) on front panel cover assembly (Figure 2, Item 6).
2. Install eight screws (Figure 2, Item 7), new lock washers (Figure 2, Item 8), and flat washers (Figure 2, Item 9).
WARNING
Be sure to maintain control of front panel cover assembly when opening or closing
cover. Failure to maintain control of cover could result in serious injury or death of
personnel.
3. Hold front panel cover assembly in place while rotating four quarter-turn fasteners (Figure 2, Item 11) 1/4-turn
clockwise.
END OF TASK
END OF WORK PACKAGE
0013-7/8 blank
