TM 10-8145-222-23
0013
REPLACE CONTINUED
Figure 1. Top Panels Looking Down.
4. Exit top of MTRCS using roof access provided.
Remove Front Panel Assembly
NOTE
There are nine screws securing the metal strip and seal to the top of the front panel
assembly. These nine screws do not need to be removed to remove the front panel
assembly. The seal and metal strip will come off with the front panel assembly when
removed.
1. Remove six screws (Figure 2, Item 1), lock washers (Figure 2, Item 2), and washers (Figure 2, Item 3) from
right side and left side of front panel assembly (Figure 2, Item 6). Discard lock washers.
2. Remove three screws (Figure 2, Item 1), lock washers (Figure 2, Item 2), and washers (Figure 2, Item 3) from
bottom left corner of front panel assembly (Figure 2, Item 6). Discard lock washers.
3. Remove five cap screws (Figure 2, Item 4) and washers (Figure 2, Item 5) securing front panel assembly
(Figure 2, Item 6).
WARNING
The front panel assembly is awkward to handle and is bulky. Use two persons when
removing the front panel assembly.
4. Remove front panel assembly (Figure 2, Item 6).