TM 10-8145-222-23
0013
REPLACE CONTINUED
Remove Right-Side Panel
1. Remove front panel assembly per this WP.
2. Remove four hex head screws (Figure 3, Item 1), lock washers (Figure 3, Item 2), and washers (Figure 3,
Item 3) securing rear flange of right-side panel (Figure 3, Item 4) to frame. Discard lock washers.
3. Remove right-side panel (Figure 3, Item 4).
Figure 3. Right-Side Panel.
Remove Left-Side Panel
NOTE
It will be easier to access hardware by swinging open the temperature chart recorder.
1. Remove three screws (Figure 4, Item 1), lock washers (Figure 4, Item 2), and washers (Figure 4, Item 3)
securing left-side panel (Figure 4, Item 7) to front panel assembly and frame. Discard lock washers.
2. Remove eight screws (Figure 4, Item 4), lock washers (Figure 4, Item 5), and washers (Figure 4, Item 6)
securing left-side panel (Figure 4, Item 7) to frame. Discard lock washers.
3. Remove two hex head screws (Figure 4, Item 8), lock washers (Figure 4, Item 9), and washers (Figure 4,
Item 10) securing left-side panel (Figure 4, Item 7) to frame. Discard lock washers.
4. Remove left-side panel (Figure 4, Item 7).
