TM 10-8145-222-23
0034
REPLACE CONTINUED
28. Adjust V-belt tension (WP 0036).
29. Adjust alternator V-belt tension (WP 0035, Adjust).
30. Install fan shroud (Figure 2, Item 2) onto condenser and secure using two bolts (Figure 2, Item 1).
31. Install top-middle panel (WP 0013, Install).
32. Make sure emergency stop switch (Figure 1, Item 1) is in PULL TO START position.
WARNING
Falling from the top of the MTRCS can result in serious injury or death to personnel.
Whenever performing maintenance on top of the MTRCS, always maintain three
points of contact to aid in stability. Never attempt to walk backwards while on top of
the container.
33. Climb off top of MTRCS using roof access provided.
34. Reconnect negative (-) battery terminal (WP 0053, Reconnect).
35. Operate MTRCS to verify proper operation (TM 10-8415-222-10, Operating Procedures).
36. Place MTRCS back into desired mode of operation (TM 10-8415-222-10, Operating Procedures).
END OF TASK
END OF WORK PACKAGE
0034-13/14 blank