TM 10-8145-222-23
0052
REPLACE
WARNING
High voltage is present when the system is in operation. Use extreme care not to
contact wires during operation as serious injury or death to personnel could result.
The MTRCS contains high voltage sources and exposed rotating parts. Make sure
that power cables are disconnected from the MTRCS and that the refrigeration unit is
shut down before performing maintenance on the unit. Failure to comply with this
warning can result in serious injury or death to personnel.
NOTE
Refer to the MTRCS electrical schematic (WP 0092) for additional information
regarding the wiring of the unit.
Replace Cable Assembly P1A
Remove
1. Make sure external electrical power unit is turned OFF.
2. Remove cable assembly P1A (Figure 8, Item 1) and P2A (Figure 8, Item 2) from storage hooks (Figure 8,
Item 3 and Item 4) and unroll sufficiently to allow room to work at power box (Figure 8, Item 5).
Figure 8. Power Cable Assembly Storage.