TM 10-8145-222-23
0088
REPAIR CONTINUED
Figure 2. Capacitor Box Cover Seal.
NOTE
Sealant will begin to harden within two hours and is full strength after 24 hours.
11. Allow gasket (Figure 2, Item 9) installation to cure for two hours.
12. Install capacitor box cover (Figure 2, Item 4) to capacitor box (Figure 2, Item 8) and secure using four bolts
(Figure 2, Item 1), flat washers (Figure 2, Item 2), and nylon washers (Figure 2, Item 3).
13. Connect battery negative (-) terminal (WP 0053, Connect).
14. Place MTRCS into desired mode of operation (TM 10-8415-222-10, Operating Procedures).
END OF TASK
END OF WORK PACKAGE