TM 10-8145-222-23
0027
REPLACE CONTINUED
14. Place POWER ON/DOWN switch (Figure 4, Item 2) on control panel to ON position.
Figure 4. POWER ON/DOWN Switch.
15. Close control panel access door (Figure 4, Item 1).
16. Place MTRCS back into desired mode of operation (TM 10-8415-222-10, Operating Procedures).
17. Monitor for the absence of AL1 and AL11 fault codes on microprocessor display (Figure 4, Item 3).
END OF TASK
END OF WORK PACKAGE
