TM 10-8145-222-23
0027
REPLACE CONTINUED
Figure 3. Thermal Water Temperature Resistor.
7. Loosen and remove thermal water temperature resistor (Figure 3, Item 2) from engine (Figure 3, Item 3).
8. Install new thermal water temperature resistor (Figure 3, Item 2) into engine (Figure 3, Item 3)
9. Tighten thermal water temperature resistor (Figure 3, Item 2).
10. Reconnect thermal water temperature resistor (Figure 3, Item 2) electrical connector (Figure 3, Item 1) to
engine harness.
11. Install right-top panel (WP 0013, Install).
12. Place emergency stop switch (Figure 2, Item 1) in PULL TO START position.
13. Climb off of MTRCS using roof access provided.