TM 10-8145-222-23
0064
REPAIR CONTINUED
Figure 1. Receiver Pressure Solenoid Coil.
5. Remove bolt (Figure 1, Item 3) securing top of solenoid coil (Figure 1, Item 2) to enclosure tube (Figure 1,
Item 4).
6. Remove coil (Figure 1, Item 2) by sliding coil off of enclosure tube (Figure 1, Item 4).
7. Install replacement coil onto enclosure tube (Figure 1, Item 4).
8. Install bolt (Figure 1, Item 3) onto top of enclosure tube (Figure 1, Item 4) to secure coil (Figure 1, Item 2).
9. Reconnect electrical connector (Figure 1, Item 1) to receiver pressure solenoid coil (Figure 1, Item 2).
10. Remove tag from electrical connector.