TM 10-8145-222-23
0079
REPAIR CONTINUED
Replace Fuse F1
NOTE
A small screwdriver may be used to open fuse holder.
1. Open fuse holder (Figure 5, Item 9) cover.
2. Remove two nuts (Figure 5, Item 10) securing fuse (Figure 5, Item 11) and wires (Figure 5, Item 12) to fuse
holder (Figure 5, Item 9).
3. Insert new fuse (Figure 5, Item 11) and wires (Figure 5, Item 12) into fuse holder (Figure 5, Item 9) and secure
using two nuts (Figure 5, Item 10).
4. Close fuse holder (Figure 5, Item 9) cover.
5. Reconnect battery negative (-) terminal (WP 0053, Connect).
6. Operate unit in accordance with normal operating procedures to verify proper operation (TM 10-8415-222-10,
Operating Procedures).
7. Place MTRCS back into desired mode of operation (TM 10-8415-222-10, Operating Procedures).
0079-10
