TM 10-8145-222-23
MAINTAINER MAINTENANCE
REPLACE
INITIAL SETUP:
Tools and Special Tools
Personnel Required
Face Shield (WP 0097, Item 20)
Utilities Equipment Repairer (2)
Gloves, Rubber (WP 0097, Item 21)
References
Refrigeration Equipment
Tool Kit (supplement) (WP 0096, Table 2, Item 7)
TM 10-8415-222-10
Service Refrigeration Ordnance
TM 10-8415-222-10
Tool Kit (WP 0096, Table 2, Item 6)
Materials/Parts
TM 10-8145-222-23P
Lock Washer, #10 ID (WP 0111, Item 11)
Equipment Condition
Lock Washer, 3/8-in ID (WP 0111, Item 13)
Tie Wrap (WP 0097, Item 55)
Refrigeration unit shut down (TM 10-8415-222-10)
External power cables disconnected (TM 10-8415-
222-10)
REPLACE
Remove
NOTE
The following replacement procedure is applicable to compartment 1 (forward) and
compartment 2 (aft) evaporator. Any differences in the procedure will be annotated in
the text where applicable.
1. Pump refrigeration unit down (WP 0014, Service).
2. Open control panel assembly door (Figure 1, Item 1).
3. On control box, place COMPARTMENT 1 ON/OFF rocker switch (Figure 1, Item 2) to OFF position.
4. Place COMPARTMENT 2 ON/OFF rocker switch (Figure 1, Item 3) to OFF position.
5. Place POWER ON/DOWN switch (Figure 1, Item 4) to DOWN position.
6. Close control panel assembly (Figure 1, Item 1) door and secure closed using latch (Figure 1, Item 5).
0080-1
