TM 10-8145-222-23
0076
REPLACE CONTINUED
4. Tighten three bolts (Figure 7, Item 1) on inboard standby motor mount bracket (Figure 7, Item 2) to 40 foot-
pounds.
5. Tighten three bolts (Figure 7, Item 1) on outboard standby motor mount bracket (Figure 7, Item 2) to 40 foot-
pounds.
6. Check that clearance measurements still exist after tightening all bolts.
7. Install top-left panel (WP 0013, Install).
8. Install top-middle panel (WP 0013, Install).
9. Exit top of MTRCS.
10. Place MTRCS back into desired mode of operation (TM 10-8415-222-10, Operating Procedures).
END OF TASK
END OF WORK PACKAGE
0076-16