TM 10-8145-222-23
0061
REPLACE CONTINUED
23. Reconnect compressor discharge temperature sensor electrical connector (Figure 5, Item 1) as tagged.
24. Connect and secure engine mount bolts (WP 0071, Install).
26. Complete engine installation (WP 0071).
NOTE
Alignment of the three major refrigeration unit components (diesel engine,
compressor, and standby motor) is important so that the belts interconnecting these
components wear evenly. Misalignment of these three components could cause belt
failure and subsequent system shutdown.
28. Add oil to replacement compressor if required (WP 0016, Service).
29. Position bracket (Figure 6, Item 6) on refrigeration unit and secure with two screws (Figure 6, Item 10), washers
(Figure 6, Item 11), and self-locking nuts (Figure 6, Item 12).
30. Install three screws (Figure 6, Item 8) and washers (Figure 6, Item 9) securing bracket (Figure 6, Item 6) to
refrigeration unit.
31. Install two screws (Figure 6, Item 1), new lock washers (Figure 6, Item 2), and washers (Figure 6, Item 3)
securing bracket (Figure 6, Item 4) to bracket (Figure 6, Item 6).
32. Secure wiring harness (Figure 6, Item 7) with two tie wraps (Figure 6, Item 5) on bracket (Figure 6, Item 6).
0061-10